all Artboard 2 Created with Sketch. arrow-back arrow-down Slice 1 arrow-right arrow-top-right article Created with Sketch. broschure Created with Sketch. burger case_study Created with Sketch. check chevron-down arrow-left arrow-right close anwender xxx-1 ds-cad-cam ds-endodontics ds-imaging-systems ds-implants ds-instruments ds-orthodontics ds-preventive ds-prosthetics ds-restorative ds-treatment-centers exe facebook file filter flyer Created with Sketch. globe home hotline image Created with Sketch. image-comparison Artboard Created with Sketch. linked-in minus video Created with Sketch. other Created with Sketch. pdf picture plus podcast ppt presentation Created with Sketch. press_releases Created with Sketch. PRESS promotion Created with Sketch. Artboard quote-text-german Created with Sketch. quote-english quote-french registration 04 search shop site_references software study Created with Sketch. text text_piece Created with Sketch. twitter upload Created with Sketch. version Created with Sketch. video Created with Sketch. whitepaper Created with Sketch. Artboard Created with Sketch. youtube zip


CAD/CAM materials for the practice CEREC materials

All-ceramic restorations fabricated on Dentsply Sirona’s CEREC systems have proved themselves millions of times in clinical practice. To fulfill the highest standards in terms of quality and machinability we are continuously developing high-performance materials and accessories which are tailored to our design software and our CEREC milling and grinding units.


Benefits of CEREC materials

  • Unlimited compatibility with Dentsply Sirona’s milling units

  • Specific and validated machining parameters for each material

  • Materials are optimally compatible with the milling and grinding process for high-quality restorations

Zirconium dioxide

CEREC Zirconia – For full contour chairside zirconia

The greatest benefit of CEREC Zirconia is the high flexural strength of the material. It is suitable for individual crowns as well as small bridges and can be processed in thin wall thicknesses. Since these restorations are manufactured in monolithic form, there is no risk of chipping. Another benefit for dentists is that zirconium oxide can be cemented conventionally.

CEREC Zirconia is a pre-shaded translucent zirconium oxide available in 10 shades on the basis of the VITA Classic Shade Guide®. The material is milled in an enlarged form and then densely sintered to its final size in the new sintering furnace CEREC SpeedFire. The oversized milling facilitates a new level of milling accuracy leading to superb, precisely fitting restorations. The sintering process takes just 10-15 minutes for crowns and 25 minutes for bridges. The subsequent glaze firing gives the restoration a high gloss finish. The material is available in two sizes (mono L and medi S).

Advantages of zirconium dioxide

  • High flexural strength (> 900 Mpa)

  • Excellent biocompatibility

  • Allows a tissue-conserving preparation

Zirconia blocks for implant prosthetics

NEW: CEREC Zirconia Meso

For screw-retained zirconia crowns

With the launch of CEREC SpeedFire and the CEREC Zirconia workflow, Dentsply Sirona has established a fast path to chairside zirconium dioxide. Now this innovative approach has been transferred to another attractive field of dental medicine: screw-retained crowns.

The high-performance material zirconium dioxide stands out in this context mainly due to its exceptionally high biocompatibility with the oral mucosa, which enables the gingiva to restore itself faster to the restoration - thereby avoiding gingivitis, irritation or even inflammation of the mucous membrane. CEREC Zirconia meso allows you to provide your patients with first-class screw-retained zirconia crowns in just one session.

The block is offered in the shades  BL2, A1, A2, A3 and A3,5 and fits all Dentsply Sirona TiBases.

inCoris ZI meso sintered zirconium oxide ceramic

For custom implant abutments

There is a growing demand for aesthetically perfect implants. Tried-and-tested zirconium abutments made with CEREC allow you to respond individually to your patients’ wishes for natural, tooth-colored, all-ceramic implant-borne restorations.

CEREC Zirconia

Now you can combine the advantages of zirconia with the proven CEREC workflow. You satisfy the most stringent quality standards while your patients get the best possible treatment.

inCoris ZI - Sintered zirconium oxide ceramic for bridge frameworks

inCoris ZI

Sintered zirconium oxide ceramic for bridge frameworks

The partially sintered inCoris ZI blocks are designed for the fabrication of crown copings as well as anterior/posterior bridge frameworks with up to two pontics. The frameworks are initially milled to an excess size. After they have been sintered, they acquire the desired characteristics (precise dimensions, density, strength, shade).

inCoris TZI

Highly translucent sintered zirconium oxide ceramic for non-veneered restorations

inCoris TZI allows CEREC users with Premium Software to fabricate anatomically sized crowns and bridges with up to nine units. Thanks to its high degree of translucency, inCoris TZI does not require any additional veneering, and thus offers a cost-effective and more aesthetic alternative to non-veneered and partially veneered metal restorations.

Feldspar ceramics

Advantages of feldspar ceramics

  • High biocompatibility

  • Resembles natural tooth enamel with regard to shading, strength and abrasion resistance

  • Can be placed immediately after polishing


Enamel-like-properties for inlays, onlays, veneers and fully anatomical crowns

CEREC Blocs C are optimized for use for inlays, partial crowns, and veneers. CEREC Blocs C guarantee a very good color integration into the residual tooth tissue of restorations and also have a clinical survival rate of 90% after 10 years.

CEREC Blocs C PC Polychromatic

For natural-looking anterior and posterior crowns

CEREC Blocs C PC are optimized for the use in crowns; with their three different layers based on varying degrees of color saturation (chroma) they can be optimally adapted to characteristic color gradients in restorations with respect to translucency and intensity. And all of this in Vita classical colors A1C-A3,5C.

CEREC Blocs C In

For excellent anterior aesthetics

The blocks consist of an inner core of highly chromatic dentin covered by a translucent layer of enamel. The dentin cores are modeled after the shape of dentin in natural teeth. The outer shape of the tooth is determined by the biogeneric data in the software. An algorithm integrated in the software aids for the right positioning of the restoration in the block, so that the exact tooth color selected by the user is achieved and an aesthetically pleasing is possible.

Sintered metals

inCoris CC

InCoris CC is a sintered metal based on a CoCr alloy, which, as in the known process of the zirconium oxide, is first of all sharpened and then densely sintered in an oven (inFire HTC speed) under an argon atmosphere. By eliminating the time-consuming and complex modeling, casting and brittle steps, InCoris CC is a fast and easy way to provide your patients with high-quality NPM restorations.

Further materials

In cooperation with VITA-Zahnfabrik, Ivoclar Vivadent, Merz Dental, 3M ESPE, GC, COLTENE, Shofu and Kuraray Noritake we offer an additional selection of high-quality third-party products. Decide for yourself which CAD/CAM material best fulfills your individual requirements.

Variety of indications and materials

Read more about the comprehensive range of treatment options with CEREC materials.

Technical documentation

CAD/CAM Materials

CEREC users benefit from an ever-increasing variety of materials. You can download the brochure here.

Download brochure

The final restoration in just a few steps

  1. Spare your patients the discomfort of a conventional impression tray. Use the CEREC Omnicam, our small powder-free color camera, for precise 3D images in natural color. New: Use the Open Scan Export to easily export your scanned cases as STL files.

  2. After analyzing the complete scan, the CEREC software generates outstanding restoration proposals. This takes you to the production stage faster. You benefit from the simple and visually appealing user interface.

  3. The CEREC grinding and milling unit and CEREC software are optimally matched. Milling/grinding the (solid zirconia) restoration design is extremely precise, giving the restorations smooth surfaces and edges and very fine fissures.

  4. Full-contour zirconia restorations are sintered and glazed chairside in the compact CEREC SpeedFire. The induction technology allows unparalleled short sintering and firing times.